Keltec P3At, Firearm Manuals

[ Pobierz całość w formacie PDF ]
KEL-TEC P-3AT PISTOL
KEL-TEC CNC INDUSTRIES INC.
PO BOX 236009
OWNED
MADE
PARTS
©
SAFETY, INSTRUCTION,
AND PARTS MANUAL
COCOA FL 32926
321-631-0068
www.kel-tec.com
KEL-TEC P-3AT PISTOL
SAFETY, INSTRUCTION, & PARTS MANUAL
STATEMENT OF LIABILITY
This pistol may be classified as a dangerous weapon and is surrendered
by KEL-TEC CNC INDUSTRIES INC. with the understanding that the
purchaser assumes all liability resulting from unsafe handling or any
action that constitutes a violation of any applicable laws or regulations.
Firearms can cause serious injury and death. Safety must be the prime
consideration of anyone who handles firearms. Always treat a firearm as
though it were loaded. Always keep the muzzle pointed in a safe
direction.
In owning a firearm, you are responsible for the firearms's safety and
security. Always secure firearms from children.
READ THESE INSTRUCTIONS,
AND WARNINGS CAREFULLY,
BE SURE YOU UNDERSTAND
THESE INSTRUCTIONS AND WARNINGS
BEFORE USING THIS FIREARM.
This SAFETY, INSTRUCTION, & PARTS MANUAL should always
accompany this firearm and be transferred with it upon change of
ownership or when the arm is loaned or presented to another person.
A copy of the SAFETY, INSTRUCTION, & PARTS MANUAL is available
FREE upon request.
1
SAFETY INSTRUCTIONS AND WARNINGS
READ AND CAREFULLY FOLLOW THESE WARNINGS
AND INSTRUCTIONS.
These warnings and instructions are provided to assure the safe
functioning of the handgun. Failure to heed them may result in improper
functioning and serious injury.
KEL-TEC firearms are designed to function reliably with proper care and
knowledgeable use. Do not use your firearm unless you fully understand
these instructions, and the safe operation of your firearm.
Only safe gun-handling habits will ensure the safe use of your firearm. This
is your responsibliity. Accidents are the result of violating the rules of safe
gun handling and common sense.
Before handling any firearm, understand its operation.
Always treat every gun as if it were loaded.
Never accept or pick-up a firearm without checking the magazine, and
the chamber to assure the weapon is empty. Do not trust the extractor
to clear the chamber, look and feel.
Always make sure the muzzle is pointed in a safe direction at all times.
Never point a firearm at anyone or anything you do not intend to shoot.
Make sure your "audience" is always 5 or more feet in back of you, not next to you
when firing.
Keep your firearm unloaded when not in use.
Never keep a loaded firearm in the home, car, boat, or RV.
Never store a firearm with a cartridge in the chamber.
Never store firearms and ammunition together, keep them locked up and
away from children.
Never touch the trigger when working the slide.
Never alter any components of your firearm.
Always use only clean, dry original factory ammunition.
Never take medications, drugs, or alcohol when handling firearms.
Never load or unload a firearm without assuring the muzzle is pointed in
a safe direction.
Never load a firearm except immediately before shooting.
SAFE GUN HANDLING IS YOUR RESPONSIBILITY
2
SAFETY INSTRUCTIONS AND WARNINGS
AMMUNITION:
The P-3AT Pistol is designed and chambered for the
.380 Auto
cartridge. Do not use any other ammuntion. The P-3AT will accept +P
ammuntion, however not with continuous use.
Only use commercially manufactured ammunition, clean, dry, and in good
condition.
Never use nonstandard, reloaded or damaged cartridges.
Never use ammunition where the pressure levels exceed industry standards.
KEL-TEC pistols are manufactured from high quality materials. They will
provide extended service life. However, all warranties, expressed or implied,
are voided and KEL-TEC will not be liable for property damage or personal
injury and consequential damages, if faulty ammunition is used in KEL-TEC
center fire pistols.
Never discharge a firearm without proper shooting glasses and hearing
protection.
Never shoot at any water surface or any surface where a ricochet can occur.
Never shoot until you are sure of your backstop and what lies beyond it.
If the gun does not discharge after pulling the trigger, do not change its
direction for at least 30 seconds, the round could be a "hangfire". If the gun
sounds different or does not operate, unload and make sure the barrel is
clear before continued firing.
Do not allow a firearm to be used by individuals who do not understand its
safe operation and the rules of safe gun-handling.
Be sure all accessories, such as holsters and grips are compatible with the
firearm and that the accessories do not interfere with safe operation.
When transporting your firearm, be sure your firearm is unloaded and that
the action is open.
If you do not understand how to operate any of our products or have any
questions about their safe handling, please write us.
Always be aware of other people so that they cannot accidentally walk into
the line of fire. When firing on a target range, be alert and follow the range
officer's commands. Never cross obstacles such as fences or streams with
a loaded firearm.
3
INTRODUCTION
The P-3AT is a semi-automatic, locked breech pistol, chambered for the .380 Auto
cartridge.
The firing mechanism is double action only. The magazine has a 6 round capacity.
The KEL-TEC P-3AT is the lightest .380 Auto pistol ever made. Thanks to its locking
dynamics and superior ergonometry, perceived recoil and practical accuracy are
comparable to much larger guns.
The P-3AT is mainly intended for police officers as a secondary weapon, or for
concealed carry by licenced citizens. The small grip size and light trigger pull make
the P-3AT ideal for female shooters.
From the very beginning of the design and development, computers have been used
exclusively. All machined components are also made on modern high speed
computerized equipment. Equally advanced quality control equipment and test
procedures ensure a firearm with uncompromising quality in materials and workmanship.
CONSTRUCTION
The P-3AT has six main component groups: barrel, slide, firing mechanism, grip,
and magazine.
The barrel is made of SAE 4140 ordnance steel, heat treated to 48 HRC.
The slide is also 4140 steel, and contains the firing pin and the extractor.
The rectangular frame is machined from a solid 7075-T6 aluminum extrusion and
houses the firing mechanism.
The trigger connects via a transfer bar to the hammer. The hammer is driven by a
novel free floating extension spring. The light weight firing pin transmits the energy
of the hammer to ignite the primer. After firing, the hammer block holds the hammer
away from the firing pin, providing a mechanical safety. The functioning of the
mechanism greatly surpasses all applicable SAAMI safety standards.
The grip is made of the ultra high impact polymer Dupont ST-8018. The grip also
forms the magazine well and the trigger guard.
The P-3AT is normally supplied with a 6 round single column steel magazine.
4
[ Pobierz całość w formacie PDF ]
  • zanotowane.pl
  • doc.pisz.pl
  • pdf.pisz.pl
  • klobuckfatima.xlx.pl